anko 42939740 Guia de início rápido - Página 6

Procurar online ou descarregar pdf Guia de início rápido para Altifalantes anko 42939740. anko 42939740 6 páginas. Port bt party speaker

Connect with Wired Microphone

NOTE:

1.Please use and place the tripod stand on a ﬂat ground to avoid unbalanced placement.

2.When the speaker and the tripod stand are used together, please ensure tighten all knob

screws from both.

3. Please don't place the speakers with different hole sizes to the tripod stand, which may

cause unstable and fall down, may hurt the people.

4.The Tripod stand height up to 2.3M, recommend to use for 1.6M, too high may cause

knock down.

5.The most stable ﬁxed size between two LED tubes is between 65cm to 85cm.

6.Please take care of the children not to touch or play with the tripod to prevent

accidentally push down.

7. Only use the tripod with this speaker only.

Connect to Wired Microphone

Insert 6.35mm wired microphone, and use control knob to adjust

the sound level.

When playing with the wired microphone, please use this knob

to adjust the volume of microphone.

When playing with the wired microphone, please use this knob to adjust the echo

volume of microphone.

Important Notes

While using the microphone, avoid being put the microphone opposite

the bass of Party Speaker,as they may have Whistler Noisy.

To get the best singing performance, keep the micro phone within

5-15cm of the mouth and at a 45 degree angle.

When using the microphone, always pay attention to the battery.

If the battery is low, the indicator light will come on and the

performance will progressively become poor.

Caution: Please do not put the microphone directly face to the

Party speaker, it may damage the speaker.