anko 42940197 Manual - Página 5

Procurar online ou descarregar pdf Manual para Altifalantes anko 42940197. anko 42940197 7 páginas. Bluetooth party speaker

Imprimir página

Getting Started

Connecting Power Cable

Power on/off switch

Warning:Ensure the

the AC connector into the 220-240V 50Hz inlet socket in the rear panel of the unit and

the other end into the standard AC 240V wall socket.

1. Do not plug or unplug the power cable while you have wet hands.

2. To protect this apparatus from alightning storm, or when left unattended and unused for

long periods of time, unplug power cable from the wall outlet.

3. When unplugging the power cord from a wall outlet, always pull on the power plug only.

Never unplug it by pulling the power cord.

Charging the internal Battery

The speaker comes with a built-in rechargeable battery, follow the below steps

to charge it:

AC INPUT(220-240V) Charging

1. Please connect the power cable on the rear panel and plugin to the 220-240V 50Hz wall

socket to charge the speaker.

2.Please charge about 2-3hours to charged fully.

DC 5V IN Charging

1.Please connect USB charger to the DC 5V input slot, then plugin to the 220-240V 50Hz

wall socket to charge the speaker.

2.The Red charging LED indicator on the rear panel will light up, the battery is being charge.

3.If fully charged, the RED indicator light will keep ﬂashing slowly. Unplug the power cable to

stop charging.

4.The charging time for USB input is about 4hours.

DC 12V INPUT

Connect the DC cable of the external power supply to the DC 12V IN terminals of the speaker

rear panel, please corresponding connect to the Red (+) and Black (-) indicated.

Noted: This DC input isnot for the battery charging, only supply the power to work for the

speaker.

Intrenal Battery Level indicator

1.There is a full grid battery indicator symbol keeping static on the right bottom corner of the

display screen, meaning battery capacity is full.

2.If the half grid battery indicator symbol will light on on the left bottom corner of the display

screen, meaning battery capacity is low.

3.If the half grid battery indicator symbol keeping ﬂashing on the left bottom corner of the

display screen, meaning battery capacity is almost running out, please charge the battery

on time.

Note: please fully charge the product when it is not going to be used for a long time and

charge once a month to keep longer battery life.

Turning ON/OFF the speaker

Turn the Power ON/OFF & Volume Knob on the rear function panel to right direction to power

on the Speaker, and turn to left direction to power off the Speaker.

is in OFF position before plugin.Plugin

Function Instructions

USB Operation

This unit has a USB port for play back MP3 music.

Insert your USB device into the USB port and the unit will start playing automatically.

Press the [MODE] button to USB mode is selected.

Press the

key to the previous or next track.

Press the

button to play or pause music

Press

button on the remote to repeat the current track, press it again to repeat all

tracks.

FM Operation

This speaker supports FM radio function.

1.Insert the Line In Cable/ FM antenna cable (supplied in the accessories) to the Line input

jack on the rear panel and extend the cable.

2.Press [ MODE ] button on the top panel or on the remote control repeatedly until FM

function is selected.

3.Short press button on the top panel to search the FM radio station automatically.

4.Press

to select the previous or next FM radio station.

Bluetooth function

1.Press [ MODE ] button on the top panel switch to the Bluetooth mode if the speaker on

other mode, there is a prompt sound.

2.Once on the Bluetooth mode," bLUE " will keep ﬂashing on the display screen.

3.Open the Bluetooth funciton of the external device and search the Bluetooth device name

"42940197 " to pair.

4.Press connect to "PAIR" with the speaker.

5.Once connected, " bLUE " will keep static on the display screen and can hear a prompt

sound, you can play the music with the speaker.

6.You can use

button or

button on top panel to control the songs of the external device.

TWS Connecting

This speaker supports TWS pairing function, please buy two same speaker to enjoy this

function.

1.Turn on the Bluetooth function of the one speaker, connected the bluetooth and playing

music.

2.Long press MODE button on the function panel to open the TWS function, "

short display on the screen.

3.Turn on the bluetooth of another speaker and " bLUE " will keep ﬂashing on the screen,

then long press [ MODE ] button of this speaker to open the TWS function, "

short display on the screen and "bLUE " will keep static.

4.Both speakers' TWS will pair automatically if above operation correct. Once TWS paired

successully, " bLUE " of both speaker will keep static.

5.Turn the volume knob on the function panel of any speaker increase or decrease the

music volume. 6.If not using the TWS function, please long press [ MODE ] to

deconnected TWS, "

" will short show on the display screen, and " bLUE " will keep

ﬂashing on another speaker.

" will