Beckmann+Egle MD3060 Manual de instruções - Página 5
Procurar online ou descarregar pdf Manual de instruções para Termómetro Beckmann+Egle MD3060. Beckmann+Egle MD3060 16 páginas.
Imprimir páginaMD3150/3060
Functional description
Microprocessor-based and equipped with a large measured-value memory, the MD 3150 is
optimal for:
• Automatic temperature monitoring
Measured values can be logged and saved automatically in free programmable time
intervals.
• Verification of temperature control settings
e.g., for heating or refrigeration systems, air conditioners, food chill systems,
temperature-sensitive technical equipment, etc.
Data can be read out, processed and logged in a PC.
• Comparative measurement of two temperature values (MD3150)
If two temperature sensors are connected, two temperature values can be compared with
each other, e.g., room temperature and temperature in the feeding line from the heater.
Temperature measurement:
Mode functions:
Switching off:
The following data is restored when the device is switched on:
- Measured values of the series
- Min - Max mean value storage
- State settings :
Brief use guide
Mode 0:
Mode 1:
Mode 2:
Mode 3:
Mode 4:
Mode 5:
Mode 6:
Mode 7:
Mode 8:
Copyright BECKMANN+EGLE GmbH, All rights reserved.
Press the ON/OFF key to switch on the device
Press the Mode key a the +/- keys as needed
Press the ON/OFF key once more.
- Intermittent measurement (°C, °F)
- Time-controlled switch-off (on/off)
- Interface output (on/off)
Changes the channel 1 / 2 / 1+2 (only MD3150)
Display °C or °F
Interface output in mode 0 ON/OFF
Starts/stops the output measured values in the memory
Measuring time interval ↑
Measuring time interval ↓
Starts a measuring series
Interrupts or ends a measuring series
Calls measured values of the saved measuring series ↑
Calls measured values of the saved measuring series ↓
Displays min, mean, max
Deletes min, mean, max
Trigger threshold temperature ↑
Trigger threshold temperature ↓
---
OFF/
/
or ON/OFF
---
Trigger condition ('trig') and switch-off function ('AoFF'), resp.
For manual measurement
Resets the measured value memory to 0
Page 5
Internet: www.bue.de