anko 42827A0 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Liquidificador anko 42827A0. anko 42827A0 14 páginas. Multi function digital blender

The blades are very sharp. Never touch with bare hands. Always hold the blade

attachment firmly by the plastic housing.

•

Surfaces could be damaged! Do not use any caustic or abrasive cleaning agents

or scouring sponges to clean the device.

1. Make sure that the device is disconnected from the mains power.

2. If required, wipe down the motor unit (5) with a slightly damp cloth. Then dry it

with a soft cloth.

3. Rinse the accessories which have been used with clear, warm water and some mild

detergent.

The cups / soup jug (10, 12, 3) along with the lids can be cleaned in the dishwasher.

Allow all parts to dry completely.

Reassemble the device.

Store the device in a cool, dry place which is protected from direct sunlight and is

out of the reach of children and animals.

NOTE: The plastic parts may suffer discoloration over time. However, this does not have

any negative effect on either your health or the performance of the appliance.

If the device does not work properly, first check whether you are able to rectify the

problem yourself.

Do not attempt to repair a defective electrical device yourself! If the device will

not switch ON, check the following:

•

Is the mains plug inserted in the plug socket correctly?

•

Is the plug socket defective? Try another plug socket.

•

Has the fuse of your main connection been activated?

•

Is the blade attachment (4) screwed on correctly?

•

Is the blade attachment (4) positioned in the motor unit (5) correctly? The device

can only be switched on if the blade attachment (4) has been positioned and

locked in place correctly in the electric motor unit (5). The arrows marked on the

blade attachment (4) and the motor unit (5) must align to one another.

CLEANING

CAUTION: The stainless steel blades are very sharp.

Handle these components with caution. Ensure you keep your fingers clear of the cutting edges when

handling these items. Take care when washing the blades. Never leave them in a sink or washing bowl

with other items. Always wash separately

1. Remove the supply cord plug from mains power outlet socket before cleaning.

2. Clean all parts, including the blender/soup jug and lid, in hot soapy water and soft cloth. Do not use

abrasive products or wash it in a dishwasher.

3. Clean the electric motor unit with a damp cloth and never put it into water, other liquids or flush it

with water.