anko WBL-2105 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Liquidificador anko WBL-2105. anko WBL-2105 9 páginas.

33. To avoid damage or injury, please assemble the product correctly.

34. Make sure the blade is securely fastened to the accessories before assembling onto the motor unit.

35. Do not attempt to repair or disassemble the appliance. There are no user-serviceable parts inside.

36. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a

sudden steaming.

37. Care shall be taken when handling the sharp cutting blades, emptying the jug and during cleaning.

38. For cleaning, please refer to CLEANING AND STORAGE section.

39. Always disconnect the appliance from mains power before approaching or when changing parts.

40. The appliance is intended to be used in household and similar applications such as:

- staff kitchen areas in shops, offices and other working environments,

- farmhouses,

- by clients in hotels, motels and other residential type environments,

- bed and breakfast type environments.

WARNING! Misuse of the appliance may cause injury and/or damage to property!

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external switching device, such as a timer, or connected

to a circuit that is regularly switched ON and OFF by the utility.

WARNING: Extension cords are not recommended for use with this product.

IMPORTANT!

To prevent damage to the electric motor, the maximum operating time is 1 minute. Allow it to rest

for at least 3 minutes before using it again. After 5 cycles of operation, allow the blender (electric

motor) to cool down to room temperature, allow it to cool down for approx. 30 minutes before using

it again.

Note: The appliance is incorporated with a non-self resetting thermal motor protection circuit to

protect the motor from overheating. If the motor shuts OFF while in use, unplug the unit from main

power outlet. Remove the blending jug from motor unit and free the blade of any obstructions.

Allow the unit to cool down for at least 6 minutes. After then, plug the unit back into mains power

for normal operation.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY