Anleaf Technologies AP300W Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Inversor Anleaf Technologies AP300W. Anleaf Technologies AP300W 7 páginas. Portable solar power generator

Imprimir página

5. Turns on the electric power without a load, please note that the high voltage still runs on AC outlet.

6. Please avoid the environment of high temperature when the battery is using.

7. Do not un-screw the solar power box except the qualified engineer.

8. To avoid the water or anything into the device.

9. Do not connect with additional battery to extend the power of device.

10. If user meets out of right operation or other operating problems, please turn off the electric power.

11. If the device is frequently extended on limit-use, it will reduce the product life.

How to Use:

1. Charging:

1.1. AC I/P as an Auxiliary Power Source

1.1.1. Turns on master switch (On/Off switch).

1.1.2. Connects up the electric power.

1.1.3. If the power energy of battery is on charge completion, the LED light will be constant light otherwise

it will be flashing continually.

1.2 Solar Power Source DC I/P

1.2.1. Turns on master switch (On/Off switch).

1.2.2. Y-type terminals of PV panel connects up the terminal block of Solar Power Box and also check if

everything is right for the red cable terminal to the positive (+) and the black or blue cable terminal to the

negative (-) of the terminal blocks on the solar power box.

1.2.3. In using the DC plug, user should connect the male DC cable of PV panel with the female DC socket.

1.2.4. If the power energy of battery is on charge completion, the LED light will be constant light otherwise

it will be flashing continually.

2. The Status of Battery Storage:

In main quiescent mode, user turns on the spring switch of battery that will know the power status via LED

display in charging mode (SoC) and will also know how voltage the battery storage in its occupation is. In

dynamic mode, user should pay attention to the operating temperature of battery in discharge current so as

to avoid affecting the battery energy storage directly. The following table is made according to the charge

voltage (SoC) and storage of battery.

Battery Storage

Voltage Level

Efficient load

Green LEDs

Orange LEDs

Red LEDs

0%~15%

15%~35% 35%~55%

9.6V~

12.2V~

1~3

1~2

55%~75%

12.6V~

12.8V~

AC/DC

1~2

2~3

75%~100%

13.2V~

AC/DC

4~5