ANLIDAR MyTorq MY8-EP0103P Manual de operação e manutenção - Página 3

Procurar online ou descarregar pdf Manual de operação e manutenção para Chave de fendas eléctrica ANLIDAR MyTorq MY8-EP0103P. ANLIDAR MyTorq MY8-EP0103P 13 páginas. Dc-type automatic non-carbon-brush with counter series

Imprimir página

WARNING!

Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious

injury. The term "power tool" in all of the warning listed below refer to your mains operated (corded) power tool or battery operated

(cordless) power tool.

SAVE THIS INSTRUCTIONS

1) Electrical Safety

a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust of fumes.

c) Keep children, and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical Safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or grounded.

c) Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord to carry, pull or unplug the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.

use reduces the risk of electric shock.

3) Personal Safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use power tool while you

are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may

result in serious personal injury.

b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

Rubber gloves and non-skid footwear are recommended when working outdoors.

c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on

the switch or plugging in power tools that have the switch on invites accidents.

d) Remove any adjusting keys or wrench before turning the power tool on. A wrench or a key that is left attached to a rotating

part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,clothing, and gloves away from moving parts. Loose

clothes, jewellery, or long hair can be caught in moving parts

g) Secure work.Use clamps or a vice to hold the work. It is safer than using your hand and frees

both hands to operate the tool.

h) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and

properly used. Use of these devices can reduce dust related hazards.

i) Use a safety device.

Wear protective earmuffs to reduce personal injury.

Noise:

The typical A-weighted noise level acc. To EN62841-2-2

.Sound pressure level(LpA): 53.6 dB(A)

.Sound power level(LwA): 64.6 dB(A)

4) Power tool Use and Care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use power tool if switch does not turn it on or off. Any power tool that cannot be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

Important Safety Rules

Vibration:

The vibration total valoue acc. EN62841-2-2

.Vibration emission value ah (m/s²): 0.17 m/s²

.Uncertainty K (m/s²): 0.02 m/s²

Use of cord suitable for outdoor