ANLIDAR MYTORQ MYCS-ID70+ Manual de operação - Página 4
Procurar online ou descarregar pdf Manual de operação para Carregador de bateria ANLIDAR MYTORQ MYCS-ID70+. ANLIDAR MYTORQ MYCS-ID70+ 7 páginas. Charge station
Contents
1. Over charged protection
2. Current protection
3. Shortage protection (fuse implement)
4. Battery reverse current protection
5. MYCS-ID70+/ MYCS-ID50+ Built-in ID recognition feature protection
6. Temperature protection
Temperature protection detail explanation
(1) When the battery temperature is between 0-10℃, the charger will use low current to pre-charge the
battery until the battery temperature higher than 10℃ , then the charger switch back to normal charging
mode. When the battery temperature is below 0℃, the charger will stop charging the battery.
(2) When the battery temperature is above 45℃, the charger will automatically change to low current to charge
the battery. When the battery temperature is exceed 50℃, the charger will stop charging the battery and
make warring beep sound.
(3) When the charger detects the battery temperature is lower 0℃ or above 50℃, then the charging process will
be stopped.
Description
Cell balance
Charging under 80%
Charging over 80%~99% N/A
Light Display and
Warning Beep
Charging Complete100% Three long beeps
Charging Error
ID matched OK
ID matched NG
Idle mode
Charger stand
Power cord
Operation manual
Warranty certification
Caution: Protection Functions
Display Description
Light Display
Beeps
N/A
N/A
Continuous short beeps
One second short B sound
N/A
N/A
3
1 pcs
1 pcs
1 pcs
1 pcs
Red
Yellow
light
light
OFF
Flash
Flash
OFF
Flash
ON
ON
OFF
Flash
OFF
----
----
Flash
OFF
ON
OFF
Green
light
OFF
OFF
OFF
ON
Flash
----
Flash
OFF