Beco Technic H 412 Instruções de funcionamento - Página 2

Procurar online ou descarregar pdf Instruções de funcionamento para Equipamento de teste Beco Technic H 412. Beco Technic H 412 2 páginas. Multitester

Imprimir página
Operating Instruction
Picture
Introduction
When the quartz watch stops moving, simply put the
watch on this "H-412 QUARTZ MOTOR & BATTERY TESTER"
for searching the defective parts.
This Checker indicates immediately where the problems
are, from the Battery, Electronic parts or Mechanical parts
without removing the watch case back.
Quartz Impulse Checker
1. Push the switch upward.
2. Put the quartz watch or movement on the "Watch Dial
Position" for testing, one of the following results will occur.
(A) If no sound and no green light:
=Either the Battery or the Electronics parts are in bad
condition.
Solution: Check/renew battery and re-test.
If still no reaction, check/renew Electronic parts or com-
plete movement.
Button Battery Checker
1. Push the switch downward.
2. Put the battery onto the "Battery Checker Plate Position" for
testing, ensure positive (+)side is downward.
3. Press down the plastic button, the battery level lights will
indicate the voltage.
BIRKENSTOCK & CO. GMBH · D-21500 Geesthacht · Germany ·
Technical changes as well as changes in production and prices are subject to our approval. For our terms of delivery and payment please go to http://www.beco-professionals.com/en/contact/gtc.htm. Please let us know if you don´t want to receive
our promotion anymore. Reg. office: D-21500 Geesthacht · Register Court: Lübeck HRB 314 GE · Managing Directors: Jürgen Birkenstock, Marek Birkenstock · VAT-Number: DE 135283788 · ILN 40 22739 00000 3 · WEEE.Reg.Nr.: DE12990100
Multitester H 412
Description
H 412
Quartz Motor +
Battery Tester
Art.-No.
301 700
+49 (0) 41 52 / 80 96 80 ·
k
Technical Data
Measurements:
W 63 x H 120 x D 18 mm
Weight:
0,08 kg
This is a reliable "Q. C. " Checker for Watch Movement Makes
and Watch Assembling Factories.
This is a dual purpose Checker, it checks both quartz watch-
es and button batteries.
(B) If hear a sound and the green light flashes, but the
watch hands do not move:
=The Battery and the Electronics parts are in good con-
dition, but the Mechanical parts are in bad condition.
Solution: Check/renew Mechanical parts and re-test.
If still no reaction, renew complete movement.
(C) If hear a sound, the green light flashes and the watch
hands are moving:
=The quartz watch or movement is in good condition.
Yellow light = Renew is necessary, weak voltage.
1
green light = Low, 1.05 volts.
st
2
green light = Good, 1.55 volts.
nd
3
green light = Good, 3.00 volts.
rd
+49 (0) 41 52 / 80 96 96 · www.beco-professionals.com
Delivery Contents
1 Multitester
2 Batteries
LR 03/AAA – 1.5 V