ABSINA 34-116-1002 Manual de instruções - Página 16

Procurar online ou descarregar pdf Manual de instruções para Carregador de bateria ABSINA 34-116-1002. ABSINA 34-116-1002 20 páginas.

16. END THE CHARGING PROCESS

During charging, the charging process can be

terminated as follows:

§ Pass the RFID card past the wallbox receiver to end

the charging process prematurely. When the vehicle

is unlocked, you can disconnect the charging plug.

§ The vehicle battery is fully charged and the vehicle

ends the charging process. When the vehicle is

unlocked, you can disconnect the charging plug.

17. ERROR DESCRIPTION

ERROR

CAUSE

OVERLOAD

Input voltage is too high.

UNDERVOLTAGE

Input voltage is too low.

The internal temperature of the

OVERHEAT

wallbox is above 85°C.

LEAKAGE CURRENT

The earthing is poor or the

EXCEEDS THE

CC/CP connection of the

LIMIT

charging plug is incorrect.

OVERCURRENT

The input current is too high.

MEASURE

If the input voltage exceeds 460V AC, the wallbox

detects overvoltage and switches off. Have the

installation checked.

If the input voltage is below 300V AC, the wallbox

detects undervoltage and switches off. Have the

installation checked.

Make sure that the ambient temperature is

below 60°C. If the internal temperature exceeds

85°C, the wallbox will switch off. Avoid direct

sunlight.

The wallbox switches off. Have your installation

checked.

The wallbox switches off at input currents above

18A. Have your installation and cables checked

for damage.

Deutsch . English