DRUID Debut Series Início rápido - Página 3

Procurar online ou descarregar pdf Início rápido para GPS DRUID Debut Series. DRUID Debut Series 4 páginas. Intelink
Também para DRUID Debut Series: Início rápido (5 páginas)

Imprimir página
DRUID Debut Series Início rápido
Before deployment, it is highly suggested to keep the device working for several days. During the
period, you can get familiar with the system, get to know the best device setting for local
environment and be sure the battery is fully charged before deployment.
We will give you in-time technical support during testing and deployment to ensure the device
can work at its best performance.
Alternative Method for Turning-On
Some models can also be turned on/off by magnet. If you have already initialized
your devices, you can also use magnet for turning on. The method is described
below:
Place the magnetic switch close to the blue dot as shown below for at least 5
seconds. The green LED light blinks for 3 seconds and goes out, and the device is
turned on.
Debut FLEX
However, this method might not give you accurate feedback. For example, the LED
blinking pattern might not be obvious in daylight, and the App does not have an
updated record about device on/off status and battery level. So, unless you are very
familiar with Debut devices, we suggest you to always use App for turning on.
Another thing to note is that when you use magnet to turn off devices, all data stored
on board will be erased, as well as the fine settings. So, if you turned off a device
with magnet, you should initialize it again with App before you deploy it on animals.
Debut FLEX II
Debut LEGO