DRY AGER DX 1000 Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Equipamento comercial para alimentos DRY AGER DX 1000. DRY AGER DX 1000 14 páginas.
Também para DRY AGER DX 1000: Manual de Instruções (17 páginas)
Imprimir página
24. Screw on the hinge bracket.
25. Insert the adjustable foot
from below and screw on the
bolt.
26. Insert the bolt completely
into the hinge bracket and
tighten the adjustable foot
manually.
27. Place the door on the bolt
and guide it to the hinge
bracket at the top.
Attention
The door must now be held by a
second person.
22
28. Insert the bearing bolts.
Front view of the upper hinge
29. Insert the bearing bolt until
the groove of the bolt is in
line with the bore of the hinge
bracket.
30. Unscrew the screw from the
bearing pin and screw it into
the hole in the hinge bracket.
31. Place the unit in its final position at the installation location.
Unscrew the adjustable foot at the lower hinge angle until it rests
on the floor, then continue to rotate 90°.
Setting the lateral inclination of the door
If the door is at an angle, adjust the inclination..
32. Disengage the cover on the
inside and slide it outwards.
33. Turn the cover downwards.
Front view of the upper hinge bracket
34. Loosen the screws and move
the hinge bracket to the right
or left.
Tighten the screws.
Refit the cover in reverse
order
Close the door and check that
it is in line with the side walls of
the unit.
23