Anntlent AN-L70V-01 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Extensor Anntlent AN-L70V-01. Anntlent AN-L70V-01 10 páginas. Cell phone signal booster
Imprimir páginafollowing measures:
- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
SAFTY WARNING:
End users must follow the specific operating instruction for satisfying RF exposure
compliance.
Do not remove the covers during working.
Name
Do not try to repair or replace any components inside of the equipment. Alteration or
abuse of the equipment or other components will void this product's warranty, and could
be dangerous to the user.
PACKAGE CONTENTS
(1) Packages include the following：
① 1Pcs AN-L70V-01 Booster with N Female connectors.
②AC/DC Power Adaptor.
③Screws Mounting Kits.
④User manual (this document).
(2) Booster interface description:
①LED light：
The corresponding LED on the right is used to indicate the following different
working conditions of the booster.
LED Indicator
LED LIGHT
②Power supply jack:
③INDOOR and OUTDOOR port：
antennas.
(3)Antennas and Cables:
In order to use the Booster, you still need the corresponding indoor antenna 1pcs, outdoor
antenna 1pcs, outdoor cable 1pcs and indoor cable 1pcs.
Antennas and cables kitting information are as follows
Model
Continuous GREEN @normal；
Twinkly GREEN @input signals may be not enough；
Continuous YELLOW @ stronger input signals, AGC is working；
Twinkly YELLOW@ self–oscillation happen ,AGC is working.
Continuous RED@ power supply is shut down；
Twinkly RED@ self–oscillation happen but power supply is NOT shut down.
The booster uses a power input range of DC 5-12V.
The two ports are used to connect outdoor and indoor
Gain/Loss
Booster working conditions
photo
3 / 10