Anolis ArcControl SU Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Controlador Anolis ArcControl SU. Anolis ArcControl SU 6 páginas.

Reset color : the color set on the wheel will be cleared and the default scene will be restored.

Play next scene : the currently selected scene will stop and the next scene will play.

Select next bank : if more than 6 scenes are stored in the controller, the next bank will be selected. One of the 6

scene selection buttons will flash for 1 second to indicate the selected bank number.

Toggle wheel color/scene mode : the wheel can be used to select a color or a scene, depending on the mode.

Tapping the button will toggle between scene selection and color selection mode. The center LED will blink when

the wheel is set to scene mode.

Disable button : the button will have no function.

5. Other Settings

There are several other settings which are available within the Hardware Manager.

Miscellaneous:

Name : a custom name for the controller, usefull if you have several controllers connected.

Parameters:

Color/Dimmer : determines whether the color/dimmer will be reset when a new scene is recalled and

whether color/dimmer changes are stored globally, or per scene.

Re-select scene : determines what happens when a playing scene is re-selected.

Reset color : clear any color changes and reset to the scene's color values.

Reset dimmer : clear any dimmer changes and reset to the scene's dimmer values.

Reset saturation : clear any saturation changes and reset to the scene's saturation values.

Starting mode (L) : change the language of the text which appears on the screen.

Re-select scene : settings related to the LEDs on the controller.

Scene LED light level : sets the brightness of the LEDs.

RGB LED enable : enables and disables the RGB LED in the center of the wheel.

Programming the Controller

The DMX controller can be programmed from a PC or Mac using the software available on our website. Refer to

the corresponding software manual for more information. The firmware can be updated using the Hardware

Manager which is included with the programming software.

ESA2 Software (Windows/Mac)

ArcControl SU

Hardware Manager (Windows/Mac) - Firmware, clock..