DRYDEN AQUA 90027 Manual de instruções - Página 15
Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição DRYDEN AQUA 90027. DRYDEN AQUA 90027 20 páginas.
Imprimir página
13. Auxiliary relay (optional kit)
The Auxiliary Relay option is a valuable feature that allows the FlowVis Digital user to control external devices such as Heater
and Chemical Feeders at user-defined flow rates. For example, you may want to control the Chemical Feeder to operate only
above 20 GPM. Setting this value is discussed in Section 12.
The Auxiliary Relay option kit installs into the rear of the FlowVis Digital Display enclosure and comprises the following items:
Qty.
Item
1
Auxiliary Relay with 12 VDC coil and 2 sets of souble pole / double throw dry contacts
1
Set of relay coil wires
1
Cable zip ties (2) with (1) adhesive pad
6
Crimp style Cable Spades
1
Cable Gland
Installation (internal)
1
1.
Secure Relay
by removing adhesive backing tape
2.
Attach pre-made blue wire
3.
Attach pre-made red wire
4.
After removing protective film, attach Cable Pad
7
5.
Use Zip Ties
as shown
6.
Connect blue wire to terminal marked 'SP2' on rear of Display
7.
Connect red wire to terminal marked 'PSU+' on rear of Display
8.
Drill hole 5/8" (16mm) diameter hole for Cable Gland
2
3
to terminal 1
on Relay
4
5
to terminal 0
on Relay
6
7
2
6
4
to rear of hinged door in location shown
8
Be careful not to damage Relay
3
1
5
8
15
1
WWW.DRYDENAQUA.COM