AbsolutAire UC-3 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança AbsolutAire UC-3. AbsolutAire UC-3 14 páginas.
Também para AbsolutAire UC-3: Manual do utilizador (13 páginas)
Imprimir página
To turn the unit on or off, press the "up arrow" to access the Fan Command.
Use the "up arrow" to select the desired option, then press the center
button "menu" to return to the main display.
To change set points such as temperature or building pressure, press the
"menu" button until you see "SET POINTS" in the top right of the screen.
Press the "up arrow" to enter this sub-menu. Your first choice will be
"mode". Use the up arrow to select "heat or vent" (unless the unit has air
conditioning, in which case the choices will be "heat/cool/air"). When you
have made your choice, press the "menu" button to move to the next menu
item, which will be the Occupied Set Point. Again, use the "up/down" arrow
buttons to make your entry and press "menu" when finished. Continue
scrolling through the Set Points sub-menu until all of your desired settings
are completed. When scrolling the menu and you see the option "BACK" in
the top right, pressing the "up arrow" will take you to the previous menu.
Scrolling through the "STATUS" sub-menu will allow you to view the status
of all of the unit sensors and burner operation. This is useful for checking
unit operation or outdoor conditions.
The "ALARMS" menu will only be displayed if there is a system alarm, as
indicated by the blinking alarm bell on the display. When an alarm is
present, scrolling through this sub-menu will allow you to view the alarm(s)
in "plain English" enumerated text. This is useful for diagnosing the unit in
the event of a problem.
Sensor Alarm Display
010622