DS Europe AN401 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Equipamento industrial DS Europe AN401. DS Europe AN401 2 páginas.

Imprimir página
Parameter
Description
LEV0
Level 0 switching value
HIS0
Level 0 hysteresis
SET0
Level 0 configuration
LEV1
Level 1 switching value
HIS1
Level 1 hysteresis
SET1
Level 1 configuration
LEV2
Level 2 switching value
HIS2
Level 2 hysteresis
SET2
Level 2 configuration
LEV3
Level 3 switching value
HIS3
Level 3 hysteresis
SET3
Level 3 configuration
Alarm level setting
E
1. Press
during normal use of AN401Plus.
2. Display shows LEV0: press
3. Display shows default value 1000: press
fastly press, at the same time,
4. Display shows LEV0: press ▲.
5. Display shows his0: press
6. Display shows default value
decrease the value press
7. Display shows his0: press
8. Display shows SET0: press
9. Display shows default value 0: press
fastly press, at the same time,
10. Repeat point 2 to 7 to set alarm levels for the the other relays.
C:
11. Press
to exit from alarm level setting menu.
Alarm levels menu
Default
1000
0
0
1000
0
0
1000
0
0
1000
0
0
E
to change value.
E
to store the desired value. To increase or decrease the value press
E
▲
and
or ▼and
E
to change value.
E
0
: press
to memorize desired hysteresis value (reduces noise effect on levels).To increase or
▲
or▼; to increase It quickly press
▲.
E
to change value.
E
to store the desired value. To increase or decrease the value press
E
▲
and
or ▼and
Via Franco Russoli, 6 – 20143 – Milano (MI) Italy, Tel. +39 02 8910142 r.a. Fax +39 02 89124848 e-
mail:
Relay setting
Relays electrical connection
AN401Plus can have up to 2 internal alarm level cards installed, with 2
relays each, on slots A and B (with only one card It will be applied in
slot B): see figure for electrical connections.
Relays electrical specifications
- Maximum voltage : 30 Vdc.
- Maximum current : 2 A.
- Maximum power : 1W.
- Switching delay time: 2 mS.
Possible values
±99999
from 0 to 50
See SET parameter
±99999
from 0 to 50
See SET parameter
±99999
from 0 to 50
See SET parameter
±99999
from 0 to 50
See SET parameter
E
to decrease It fastly .
and E, at the same time, or ▼and
▲
E
to decrease It fastly .
internet :
www.dseurope.com
SET parameter
Working MODE
Function
0
Relè disabled
1
GROSS showing on display.
2
NET showing on display.
3
Positive peak value
4
Negative peak value
E
to decrease It quickly.
Ver. 1.0 del 23/07/2003
▲
or▼; to increase It
▲
or▼; to increase It