Airthings Corentium Pro Manual - Página 6

Procurar online ou descarregar pdf Manual para Sensores de segurança Airthings Corentium Pro. Airthings Corentium Pro 8 páginas. Continuous radon monitor
Também para Airthings Corentium Pro: Manual (9 páginas), Manual de início rápido (2 páginas)

Imprimir página

wish to conclude the radon test with no added photos

or comments, tap on the "Finalize Test" button at the

bottom of the screen. This will begin uploading the

dataset to the Dashboard. Once the dataset is uploaded,

you will be taken back to the main screen of the monitor.

Viewing a Dataset

To view the information of a dataset, first finalize the

dataset as described in the above section. After the

dataset has been finalized, a button will appear titled

"View Dataset". Tap this button to see the details of the

radon test including the measurement information, and

logged motion events if any occurred.

Note: Your mobile device must be connected to the

internet to view the dataset information.

Generating a Report in the App

To generate a radon report in the field, locate the

correct dataset and tap on the "Generate Report"

button. The dataset must first be finalized before

the Generate Report button will appear. Follow

the prompts to set various options for the final

radon report. These options will vary based on the

information blocks that are included in the selected

report template. These options can include information

about motion events that occurred during the

measurement, selecting a dynamic paragraph option

(dynamic paragraphs are typically used to inform the

client of the recommended actions regarding the

overall radon average), and signing the report.

Note: Your mobile device must be connected to the

internet to generate a radon report.

Checking Monitor Details

To check details of the monitor, such as the firmware

version, date and time, calibration expiration date,

or status of a monitor, connect to it as described in

the section above. Once connected to the monitor,

tap on the "i" button near the serial number at the top

of the screen.

Other Operations

To log out of the app, from the home screen, tap on the

gear icon at the top right corner of the screen, then tap

on "Log Out". You can also get help with the Corentium

Pro software system by tapping on the Help button.

The version number of the mobile app is located at the

bottom of this screen.

STATUS LIGHTS

• Flashing green once every 5 seconds: Normal

operation, monitor is recording data.

• Flashing green once per second: Radon test

scheduled, monitor in delay period.

• Flashing green, yellow, and red sequentially:

Monitor rebooting andperforming self-test.

• Flashing yellow: Indicates a warning but is still

operational. This usually means that the monitor

needs to synchronize the date, time, and time

zone. Connect to the monitor through the app to

synchronize the time.

• Flashing red: Error. Go to help.airthings.com/pro and

search for the keyword RED. If this does not solve

the issue, go back to the search bar and type Pro-

Technical Support Hours

• Blue flash and beep: Bluetooth connection established.

• Blue flash (once): Bluetooth connection ended.

• Continuous blue: USB connected.

CRA PC Software

1. To download the software, go to help.airthings.com,

and type CRA in the search bar.

2. Refer to the Installation Guide and Software Manual

and open CRA PC Software

3. Connect the monitor to the PC via the USB cable.

Note: The CRA software is mainly used to remotely

troubleshoot a unit. It can may be used to create

report, but due to its complexity, we highly recommend

using only the Corentium Pro App and Pro Dashboard.