Daintree GE Tetra GEAM2432-W1 Manual de instalação - Página 6

Procurar online ou descarregar pdf Manual de instalação para Equipamento de iluminação Daintree GE Tetra GEAM2432-W1. Daintree GE Tetra GEAM2432-W1 6 páginas. Led lighting system

Imprimir página

Tetra

Atom

Maximum Loading per 24V DC Power Supply

Power Supply

Rating per module

GEPS24-25U-NA

Load shall not exceed 1.04A

GEPS24D-80U, GEPS24W-80

Load shall not exceed 3.3A

GEPS24-100U-GLX, USVI-100024FBA, USVI-100024FE

Load shall not exceed 4.0A

GEPS24-180U

Load shall not exceed 3.8A per each (of 2) output channels

GEPS24-300U-GL

Load shall not exceed 4.0A per each (of 3) output channels

GEPS24-100U-GLX2/TT

Load shall not exceed 4.0A

GEPS24-200U-GLX2

Load shall not exceed 4.0A per each (of 2) output channels

GEPS24-300U-GLX2

Load shall not exceed 4.0A per each (of 3) output channels

NOTE: The maximum loading claimed in the table is at ambient temperature 25°C (77°F).

For linear long runs, center connection to the LED strip is recommended to minimize voltage drop.

Maximum Remote Mounting Distance from Driver Output

18 AWG/0.82 mm

25W Power Supply

80W Power Supply

100W Power Supply

180W Power Supply

200W Power Supply

300W Power Supply

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

This Class [A] RFLD complies with the Canadian standard ICES-005. Ce DEFR de la classe [A] est conforme à la NMB-005 du Canada.

This product is intended solely for the use of non-residential signage lighting and is not intended for use in any other applications.

16 AWG/1.31 mm

Supply Wire

120 ft./36.6 m

20 ft./6.1 m

Conforms to the following standards:

www.gecurrent.com

General Electric Company and are used under license. Information provided is subject to change without

notice. All values are design or typical values when measured under laboratory conditions.

SIGN268 (Rev 06/29/21) Enovia - A-1023158

GEAM2471-W1, GEAM2465-W1, GEAM2457-W1,

GEAM2450-W1, GEAM2441-W1, GEAM2432-W1

24V DC, 10.5mA/module, 0.25W/module

75 modules/12.5 ft. (3.81 m)

240 modules/40 ft. (12.19 m)

300 modules/50 ft. (15.24 m)

270 modules/45 ft. (13.72 m) per bank

540 modules/90 ft. (27.43 m) per PS

300 modules/50 ft. (15.24 m) per bank

900 modules/150 ft. (45.72 m) per PS

327 modules/54.5 ft (16.61 m)

327 modules/54.5 ft (16.61 m) per bank

654 modules/109 ft (33.22 m) per PS

327 modules/54.5 ft (16.61 m) per bank

981 modules/163.5 ft (49.83 m) per PS

14 AWG/2.08 mm

Supply Wire

25 ft./7.6 m

35 ft./10.6 m

25 ft./7.6 m

35 ft./10.6 m

25 ft./7.6 m

35 ft./10.6 m

25 ft./7.6 m

35 ft./10.6 m

25 ft./7.6 m

35 ft./10.6 m

III

Installation Guide

12 AWG/3.31 mm

Supply Wire

40 ft./12.1 m