DSC Classic PC580 Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Sistema de segurança DSC Classic PC580. DSC Classic PC580 18 páginas.

Viewing Trouble Conditions

The control panel continuously monitors a number of possible trouble conditions. If one of these

trouble conditions occur, the keypad will beep twice every 10 seconds until you press any key on the

keypad.

NOTE: A TROUBLE condition reduces the security your system is designed to provide. Call your

installing company for service.

To view troubles from an LED Keypad:

A trouble will be indicated by the Trouble light which will remain ON until the trouble condition is

cleared. If you cannot determine the cause of the trouble condition, contact your installer for

assistance.

To view the type of trouble condition, press [ ][2]. A one or more zone lights will turn ON, indicating

the various trouble conditions:

ZONE LIGHT

TYPE OF TROUBLE

1 ................. Service required. Call your installation company for service.

2 ................. Indicates the loss of AC power. When this trouble occurs, the Trouble light will turn

ON but keypad buzzer will not sound.

3 ................. Telephone line trouble.

4 ................. The panel has failed to communicate with the central station.

5 ................. Zone fault. Press [5] and the zone light(s) corresponding to the faulted zones will turn ON.

6 ................. Zone tamper. Press [6] and the zone light(s) corresponding to the tampered zones will

turn ON.

7 ................. Low zone battery. Press [7] and the numbers corresponding to the zones with

battery trouble will turn ON.

8 ................. Loss of time on system clock. To set the system time, following the instructions in

"Setting System Date and Time" on page 12.

To view troubles from an LCD Keypad:

From the Ready state, use the arrow (< >) keys to scroll to the following message.

Press [ ] [2] key to view the trouble. The message will read...

System Trouble

(*2) to View <>

Use the arrow (< >) keys to view which troubles are present on the system. Once

View Trouble <>

you have scrolled through the list of troubles, this display will read...

"Trouble Message"

Press the [#] key to exit the Trouble Viewing mode and return to the Ready state.