DSC Maxsys PC6010 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança DSC Maxsys PC6010. DSC Maxsys PC6010 20 páginas.

2.4 Turning Area(s) ON - "Attempt Failed" Message ________________________________

If you see the message "Attempt Failed" when you have tried to turn your area(s) on, one

or more zones may be open, or may have a fault. If possible, make sure that all of the

zones are closed when you turn an area on.

WARNING: Turning on areas with open zones reduces your security protection. If a zone

in your area is not working, or you cannot close it, call a Supervisor or Master user

immediately, so that the problem can be resolved.

Step

1. Use procedures 2.2 or 2.3 to try to turn on all or some of your areas.

Step

2. Keypad displays:

Turn On All

Your Areas?

To confirm either of these options, press

Step

3. The keypad displays:

Attempt Failed

View Problems?

Step

4. The keypad displays a list of the zone(s) that are open, or that have faults, and the

area(s) they are in. Use the

the end of the list, the keypad displays:

End of List

Turn On Anyway?

Step

5. Check Open Zones

If you want to go and check that the listed zones are closed, press

The keypad displays:

System Will Not

Turn Areas On!

Close all doors and windows, or stop motion in each zone that was listed, then go

back to step 2. If all the zones are secure, you will be able to turn on the selected

area(s) as described in procedures 2.2 and 2.3.

Turn On Area?

Area 1

To see a list of open zones, press

keys to view each open zone. When you come to

continued next page...