Ansel Pan/Tilt & Dome Type Manual de início rápido - Página 8
Procurar online ou descarregar pdf Manual de início rápido para Câmara IP Ansel Pan/Tilt & Dome Type. Ansel Pan/Tilt & Dome Type 12 páginas. Multi-profile network cameras: pan/tilt & dome type
Imprimir página- Plug-in Ethernet Cable into LAN port (necessary)
- Connect the attached 12V power adapter to camera and plug-in this adapter
into power outlet (necessary)
- Connect Video BNC connector to a local TV if necessary (to check camera
viewing angle)
9. Done
2.3 P/T IP Camera Installation
Connections:
Audio
Output Jack
DC Power
Jack
Audio Output Jack
It allows this device to output audio or alerting sound. Connect with a 3.5Ø phone jack
speaker (external adaptor)
DC Power Jack
The input power is 12VDC. Note that supply the power to the Camera with the power
adapter included in package. Otherwise, the improper power adapter may damage the
unit and result in danger.
Antenna Connector
User can attach the included wireless antenna to this connector (SMA type) or use
another high-gain antenna to get higher performance.
LAN Socket
The LAN socket is a RJ-45 connector for connections to 10/100Base-TX Fast Ethernet
cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5 "straight through" cable to
connect the Network Camera to a 100Mbps Fast Ethernet network switch or hub. Note
that, in case you need to connect the device to PC or notebook directly, you should use
"cross-over" cable instead.
Factory Default Reset
This button is hidden in the pinhole. Please refer to the Appendix A in this manual for
Antenna
Connector
8
LAN Socket
Factory
Default Reset