DSC PC5108L Manual de instalação - Página 6
Procurar online ou descarregar pdf Manual de instalação para Sistema de segurança DSC PC5108L. DSC PC5108L 17 páginas.
S
3.1 Programming via Keypad
The PC5108L can be programmed from a system keypad. To pro-
gram the module, perform the following:
1. Enter [*][8] followed by your Installer's Code.
2. Enter [806] to access PC5108L module programming.
3. Enter a 2-digit number corresponding to the PC5108L
programming section you wish to program. For example, to
program the Module Zone Group Assignment, enter [00].
4. Enter the required data for the selected section. The keypad will
only accept the number of digits required for that section. For
example, Section [00] will accept two digits. The keypad will
confirm a correct entry by sounding two short beeps.
For more information regarding programming the system through
Installer's Programming, refer to Section 4 "How to Program" in your
PC5015 Installation Manual.
3.2 Programming via Downloading
The PC5108L can be programmed via downloading using either of
the following methods:
1. By connecting to the control panel remotely using a modem.
2. By connecting to the control panel directly using the PC-Link.
Both cases require the use of DLS-1 v6.5. For instructions on
downloading using either of these methods, see the Downloading
Manual.
How to Program
E
C
T
I
O
4
N
3