DSC Power 832 PC5532 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Sistema de segurança DSC Power 832 PC5532. DSC Power 832 PC5532 3 páginas. Led keypad code changes
Imprimir página
Access Codes
Access codes are used to arm and disarm the system. There are 32 access codes available: 1 master code, 32
regular access codes, 2 duress codes and 2 partition master codes. Ask your installer for more information on
using the duress and partition master codes.
Only the Master Code can be used to program additional security codes and to change other system fea-
tures as well as to arm and disarm the security system. The Master Code will be supplied to you by your
installer. All keypad entries are made by pressing one key at a time.
NOTE: An access code can be a four or six digit number depending on how your installer has programmed
your system. Ask your installer for more information regarding access codes.
Programming Security Codes
Programming codes from an LED or LCD5501Z Keypad:
The Master Code
To program the Master Code, enter [*][5][current Master Code][40][new Master Code]. The Master Code must
be four digits unless otherwise indicated by your installer. Enter digits 0 through 9 only.
Press [#] 3 times to return to the Ready state.
Be sure to record your new Master Code on the "System Information" page in this booklet.
NOTE: We recommend that the factory default Master Code [1234] not be used.
Additional Codes
Up to 36 additional codes may be programmed. Codes 01-32 are regular access codes. Codes 33 and 34 are
duress codes. Codes 41 and 42 are the partition 1 and partition 2 master codes, respectively.
To program a new code:
Enter [*][5][Master code][code number][new access code]. The code number is a double-digit number from
01-34 or 41-42.
Access codes must be four digits long. Enter digits 0 through 9 only.
To exit code programming, press [#] 3 times.
If an access code already exists for the code number you have selected, it will be replaced by the new code.
To erase a code:
Enter [*][5][Master code][code number][*]. To exit code programming, press [#] 3 times.