DSC PowerSeries PC4020 Manual de instruções - Página 15

Procurar online ou descarregar pdf Manual de instruções para Sistema de segurança DSC PowerSeries PC4020. DSC PowerSeries PC4020 20 páginas. V4.2

PK5500 Global Status Screen

When the keypad is loaned to global mode (pressing and holding the

Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration

of your system. The screen looks similar to the example shown below.

Each partition is identified by a number. Below each number is the current status of that partition.

- Partition is Armed

- Partition is Not Ready to Arm, or keypad is blanked

- Partition is Ready to Arm

- Partition is in Alarm

- Partition is Not Enabled

Certain sensors, after having detected an alarm condition, require a reset to exit the alarm condition

(i.e. glass break sensors, smoke detectors, etc.). Ask your alarm company if this function is required

on your system.

To reset the detectors, press and hold the Reset key (

If a sensor fails to reset, it may still be detecting an alarm condition. If the sensor reset is successful,

the alarm is cancelled. If unsuccessful, the alarm will reactivate or continue.

Fill out the following information for future reference and store this guide in a safe place.

Enabled?

FIRE

[F]

The Exit Delay Time is _______ seconds.

The Entry Delay Time is _______ seconds.

For Service

Central Station Information

Account#: ___________________ Telephone#: __________________

Installer Information :

Company: ___________________ Telephone#: __________________

If you suspect a false alarm signal has been sent to the central monitoring station,

call the station to avoid an unnecessary response.

AUXILIARY

[A]

1 2 3 4 5 6 7 8

A R ! N - - - -

) for 2 seconds or press

PANIC

[P]

key), you will see a Global