3M Littmann 4000 Manual - Página 10

Procurar online ou descarregar pdf Manual para Equipamento médico 3M Littmann 4000. 3M Littmann 4000 11 páginas. Electronic stethoscope
Também para 3M Littmann 4000: Manual (11 páginas)

Imprimir página

groove of the rim, starting at one point, and running your

finger around the inside of the rim. This technique will

position the diaphragm properly in the designated groove.

• Place the rim and diaphragm assembly on the chestpiece

surface. Totally engage the assembly in the groove on

chestpiece at one point and hold in place with thumb.

Slowly roll the rim around the chestpiece edge using both

thumbs moving in opposite directions.

General Use and Maintenance

• The entire stethoscope can be wiped clean with alcohol.

• Do not immerse the stethoscope in any liquid or subject it

to any sterilization process.

• Eartips can be removed for a thorough cleaning.

• Remove the battery whenever the stethoscope is stored or

will not be used for several months.

• Avoid extreme heat, cold, solvents and oils. Recommended

storage conditions are from -4˚F to 140˚F (-20˚C to 60˚C),

15 to 95% relative humidity.

Failure to follow care and maintenance recommendations

could result in damage to the internal components of the

Model 4000. Internal damage could cause malfunction of the

product, ranging from a slight decrease in auditory response

to complete failure of the product.

If you experience any problems with the Model 4000 do not

attempt to repair it yourself. Please notify the 3M Health Care

Service Center for directions on shipping and receiving.

Littmann Stethoscope Service and Warranty

Program

The Littmann Electronic Stethoscope Model 4000 is

warranted against any defects in material and manufacture for

a period of one year. If a material or manufacturing defect is

discovered during the warranty period, repairs will be made

without charge upon the return of the instrument to 3M,

except in cases of obvious abuse or accidental damage.

For technical questions, call the 3M Health Care Tech Line at

1-800-441-1922.

For maintenance or repair services in the United States, send

your stethoscope directly to:

3M Health Care Service Center

3M Building 502-1W-01

3350 Granada Ave N

Suite 200

Oakdale, MN 55128

1-800-292-6298

Enclose your name, address, phone number and reason for

repair with your stethoscope.

In Canada:

3M Health Care Service Center

3M Canada Inc.

80 Enterprise Drive South

London, Ontario

Canada N6N1C2

1-519-668-3663

Outside of the United States and Canada, contact your local

3M subsidiary for maintenance and repair information.