DSC PC1000 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Teclado DSC PC1000. DSC PC1000 8 páginas.
Também para DSC PC1000: Manual de instruções (8 páginas)

Imprimir página

LIMITED WARRANTY

Digital Security Controls ltd. warrants that for a period of twelve months from the date

of purchase, the product shall be free from defects in materials and workmanship under

normal use and that in fulfilment of any breech of such warranty, Digital Security Controls

Ltd. shall, at its option, repair or replace the defective equipment upon return of the

equipment to its repair depot. This warranty applies only to defects in parts and

workmanship and not to damage incurred in shipping or handling, or damage due to

causes beyond the control of Digital Security Controls Ltd., such as lightning, excessive

voltage, mechanical shock, water damage, or damage arising out of abuse, alteration

or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu

of any and all other warranties, whether expressed or implied and of all other obligations

or liabilities on the part of Digital Security Controls Ltd. Digital Security Controls Ltd.

neither assumes, nor authorizes any other person purporting to act on its behalf to modify

or to change this warranty, nor to assume for it any other warranty or liability concerning

this product.

In no event shall Digital Security Controls Ltd. be liable for any direct or indirect or

consequential damages, loss of anticipated profits, loss of time or any other losses

incurred by the buyer in connection with the purchase, installation or operation or failure

of this product.

WARNING:

Digital Security Controls Ltd. recommends that the entire system be

completely tested on a regular basis.

However, despite frequent

testing, and due to but not limited to, criminal tampering or electrical

disruption, it is possible for this product to fail to perform as expected.

FCC COMPLIANCE

CAUTION:

Changes or modifications not expressly approved by Digital Security Controls Ltd.

could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Re-orient the receiving antenna.

• lncreas.e the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and

Resolve Radio/Television Interference Problems". This booklet is available from the U.S.

Government Printing Office, Washington D.C. 20402, Stock# 004-000-00345-4

Important Information

This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label

that contains, among other information, the FCC registration number of this equipment.

Notification to Telephone Company

Upon request, the customer shall notify the telephone company of the particular line to which the

connection will be made, and provide the FCC registration number and the ringer equivalence of

the protective circuit.

FCC Registration Number: F534J3-19591-AL-R

Ringer Equivalence Number: 0.18

USOC Jack: RJ-31X

Telephone Connection Requirements

Except for the telephone company provided ringers, all connections to the telephone network shall

be made through standard plugs and telephone company provided jacks, or equivalent, in such

a manner as to allow for easy, immediate disconnection of the terminal equipment. Standard jacks

shall be so arranged that. if the plug connected thereto is withdrawn, no interference to the

operation of the equipment at the customer's premises which remains connected to the telephone

network shall occur by reason of such withdrawal. Ensure that plugs and jacks meet the

dimension, tolerance and metallic plating requirements of 47 C.F.R. Part 68 Subpart F.

Incidence of Harm

Should terminal equipment or protective circuitry cause harm to the telephone network, the

telephone company shall, where practicable, notify the customer that temporary disconnection

of service may be required; however, where prior notice is not practicable, the telephone company

may temporarily discontinue service if such action is deemed reasonable in the circumstances.

In the case of such temporary discontinuance, the telephone company shall promptly notify the

customer and will be given the opportunity to correct the situation.

Additional Telephone Company Information

The security control panel must be properly connected to the telephone line with a USOC RJ-31 X

telephone jack. The FCC prohibits customer-provided terminal equipment be connected to party

lines or to be used in conjunction with coin telephone service. Inter-connect rules may vary from

state to state.

Changes in Telephone Company Equipment of Facilities

The telephone company may make changes in its communications facilities, equipment,

operations or procedures, where such actions are reasonably required and proper in its business.

Should any such changes render the customer's terminal equipment incompatible with the

telephone company facilities the customer shall be given adequate notice to the effect modifications

to maintain uninterrupted service.

Ringer Equivalence Number (REN)

The REN is useful to determine the quantity of devices that you may connect to your telephone

line and still have all of those devices ring when your telephone number is called. In most, but not

all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0).

To be certain of the number of devices that you may connect to your line, you may want to contact

your local telephone company.

Equipment Maintenance Facility

If you experience trouble with this telephone equipment, please contact the facility indicated

below for information on obtaining service or repairs. Do not return equipment to this address

without prior authorization. The telephone company may ask that you disconnect this equipment

from the network until the problem has been corrected or until you are sure that the equipment is

not malfunctioning.

Digital Security Controls Ltd.

160 Washburn Street

Lockport, NY 14094

Please note that this facility will only accept preauthorized shipments from DSC distributors.

If you have problems with your system, contact your installer or service representative for

assistance.

Products received without an authorization number will not be accepted.