Anslut 007442 Manual de Instruções - Página 19
Procurar online ou descarregar pdf Manual de Instruções para Ventilador Anslut 007442. Anslut 007442 20 páginas.
Imprimir página
USE
USING WITH THE REMOTE CONTROL
Plug the plug (14) into a power point.
ON/SPEED
Start the product by pressing the ON/SPEED
button. Press the button repeatedly to switch
between low, medium and high speed.
The status light for the set speed comes on.
OFF-TIMER
Press the OFF-TIMER button to set the shut-off
delay to 1, 2, 4 or 8 hours. The status light for
the set delay comes on.
OFF
Switch off the product by pressing the OFF
button.
MODE
•
Press the MODE button to set the required
mode. The status light switches between
red and green each time the button is
pressed.
•
When the status light is red the product is
in RHYTHM mode. The product switches
between small, medium and large airflow,
and then back to the small airflow. The
function starts from the mode the product
was in when the function was enabled.
When the function is disabled the product
returns to the mode it was in before the
function was enabled.
•
When the status light is green the product
is in SLEEP mode. The airflow
automatically decreases 1 step at
30-minute intervals, down to small
airflow. The product switches off when the
set switch-off delay has elapsed.
NOTE:
•
The remote control has a range of at
least 10 metres. The functions can also
be controlled by using the buttons on
the product.
•
90° oscillation can be set with the
remote control. The motor unit can be
tilted upwards or downwards to the
desired airflow direction. Press the
button to set the required angle.
MAINTENANCE
CLEANING
1.
Switch off the floor fan, pull out the plug
and wait until all moving parts have
completely stopped before cleaning.
2.
Dismantle the floor fan by following the
assembly instructions in the reverse order.
3.
Clean the floor fan with a soft cloth
moistened with a mild detergent.
NOTE:
•
Never immerse the floor fan in water or
any other liquid.
•
Clean the floor fan before putting it
away, and store it in a dry place in its
box or other suitable packaging.
EN
19