FoxGate S6208-S1 Manual de instalação - Página 15

Procurar online ou descarregar pdf Manual de instalação para Interruptor FoxGate S6208-S1. FoxGate S6208-S1 16 páginas.

FoxGate S6200 Series Installation Guide

Caution!

Do not stare directly at the 2 fiber bore in the SFP transceiver when the switch is in

operation, otherwise the laser may hurt your eyes.

Copper Cable/Fiber Cable Connection

2.3.4

Copper cables should be connected as below:

Step 1: Insert one end of the Ethernet cable to the RJ-45 Ethernet port in the switch

copper cable line card;

Step 2: Insert the other end of the Ethernet cable to the RJ-45 Ethernet port of other

device;

Step 3: Check all status indicators for the corresponding ports; a lighted LED indicates

that the link has been established, otherwise the link is not ready and the cable should be

examined.

Caution!

Please verify the sign above the port to ensure using the right port. Connecting to

wrong ports might damage the switch.

Fiber cables should be connected as below:

Step 1: Remove the protective plug from the SFP/XFP fiber transceiver bore; Remove

the protective cap from one end of the fiber cable. Keep the fiber end clean and neat.

Step 2: Attach one end of the fiber cable to the SFP/XFP transceiver, and attach the

other end to the transceiver of the corresponding devices. Note: The SFP/XFP

transceiver's TX port should be connected to the RX port of the corresponding device,

and vice versa.

Step 3: Check the fiber port status indicator, a lighted LED indicates that the link has

been established; otherwise the link is not ready and should be examined.

Caution!

Please verify the sign above the port to ensure using the other ports. Connecting to

wrong ports might damage the transceiver or the other ports. When connecting other

devices through a fiber cable to the switch, the output power of the fiber cable must not

exceed the maximum received power of the corresponding modules. Otherwise, it will

damage the switch. Do not stare at the fiber bore when the switch is in operation. That

may hurt your eyes.

Chapter 2 Hardware Installation