DSC LE4020 Manual de instalação - Página 3

Procurar online ou descarregar pdf Manual de instalação para Telemóvel DSC LE4020. DSC LE4020 8 páginas. Lte / 3g cellular alarm communicator

Imprimir página

This manual covers two communicator models, the LE4020 and the LE4020(CF). They are referred to

throughout this manual as LE4020/LE4020CF unless otherwise indicated.

This LE4020/LE4020CF manages transmissions to a central station and can simulate the landline in the

event of trouble (e.g., landline down) or even substitute the landline completely in areas where the 3G or

2G cellular service is provided and a landline is not available.

By connecting a to a control panel's standard PSTN interface, telephone-based Contact ID or SIA signals are

decoded and seamlessly routed through the LTE or 3G network to any of the compatible receiver options.

The LE4020/LE4020CF are wireless communicators for UL commercial fire and/or burglary applications.

Both models send alarm system information to a Sur-Gard System I-IP, II, III, IV or 5 receiver. The

LE4020/LE4020CF uses the LTE or 3G wireless network. The LE4020/LE4020CF can be used with

UL/ULC Listed compatible control units, as indicated in the manufacturer's installation instructions.

NOTE: These communicators are designed to work with the Contact ID communication format as described

in the SIA DC-05 standard and the SIA DC-03 standard for 300 baud. Before completing the field install-

ation of the alarm monitoring system please ensure communication with the supervising central station is

successful by sending several events and getting confirmation that they have been received.

Features

Dual-band UMTS/HSPA; Penta-Band LTE (LE4020)

Advanced Carrier Selection

Bi-color Wireless Signal Strength Indicator

LTE or 3G Internet communication with Sur-Gard SG-System I-IP / II / III / IV / 5

Compatible with listed alarm control panels that have an integrated DACT and support a 4-digit or 10-

digit Contact ID communication format as described in SIA DC-05 Standard and the SIA DC-03 standard

for 300 baud. Example of suitable compatible alarm panels:

DSC Models PC1864, PC1832, PC1616, PC4020. For LE4010, the following alarm panels are also com-

patible: HS2128, HS2064, HS2032, HS2016

Panel Transmission Monitoring for up to four phone numbers

Simulates landline

Switches automatically to the LTE or 3G (LE4020CF) network in the event of landline trouble (e.g., line

down)

Four Programmable (NO/NC/SEOL) Inputs

Contains one 12V - 7 Ah battery

12V 1.2/4/7Ah battery (optional, not included)

Case Tamper Input

Landline overvoltage protection

Four Programmable Outputs

DLS support for status, firmware updates and remote debug enable

Remote Firmware Upgrade

Remote Diagnostics

Panel Format Detection

SMS Command and Control

Phone number call direction

Easy enrollment with C24 Communications via web or mobile interface

Technical Specifications

The input voltage to the LE4020/LE4020CF can be drawn from the UL/ULC Listed control panel or

provided by an external UL/ULC Listed power supply rated for the application (external power-limited

source).

NOTE: The power supply must be Class 2, Power Limited. For residential applications a suitable power

adaptor is model DSC ADP1310(W)-NAU or DSC ADP1320-NAU (for USA) and model DSC ADP1310(W)-

NA (for Canada).

Table 1: Ratings

Power Supply Ratings

Input Voltage:

Current Consumption

Average Current (standby

with PSTN connected):

Average Current (standby without

PSTN connected):

Transmission Current (no

battery):

* Plus any current drawn from the LE4020/LE4020CF AUX+ terminal. Each of the four PGM outputs can

be loaded up to 50 mA (max)

Introduction

9 Vdc to 28Vdc (use separately listed control panel or power supply)

oruse DSC ADP1310 (W)-NAx or ADP1320-NAx power adapter with

battery 12V 1.2/4/7Ah

40 mA*

55 mA*

225 mA*