Foxpro HELLCAT TX433XL Manual de instruções - Página 17

Procurar online ou descarregar pdf Manual de instruções para Altifalantes Foxpro HELLCAT TX433XL. Foxpro HELLCAT TX433XL 20 páginas.
Também para Foxpro HELLCAT TX433XL: Manual de instruções (16 páginas)

Imprimir página

a dry location and remove batteries prior to storage or extended

periods of inactivity! All batteries, whether alkaline or rechargeable,

should be removed from the game calls, decoys, and transmitters prior

to storage or periods of inactivity. Batteries left inside of electronic

devices can leak over time. Damages caused by this can be severe and

potentially destroy the electrical components. To prevent this from

happening, simply remove all batteries from all devices before you put

them away. Keep in mind: damage caused by battery leakage is not

covered under warranty.

8. Troubleshooting

If the Prowler doesn't turn on, make sure you have fresh batteries

installed. If the Prowler does not produce any sound, make sure that

the speaker switch is in the on position (to the right). If the TX433XL

does not turn on, try replacing the battery. If you experience poor

battery life in freezing conditions, consider using lithium or

rechargeable NiMH batteries as they will function much better in

freezing conditions. If the pilot light on the Prowler is blinking, this

indicates that the batteries are low. If the pilot light blinks 5 times and

then turns off for 2 seconds and repeats, this means a problem has

been detected with memory card and you should contact service.

9. FCC & IC Information

RF Exposure Safety Notice

The Prowler transmitter is not intended to be operated closer than

20cm (about 8 inches) to your body. The transmitter can produce a

radiated RF field similar to that of a standard cell telephone, although

the duty cycle of this RF field is much lower than that of a cell

telephone. Using the transmitter closer than 8 inches to your body can

increase your exposure to RF energy levels thought by some to be