Foxpro SNOWPRO Manual de instruções - Página 18

Procurar online ou descarregar pdf Manual de instruções para Altifalantes Foxpro SNOWPRO. Foxpro SNOWPRO 20 páginas.

7. Product Care & Maintenance
Avoid exposure to all precipitation and moisture. Moisture can
potentially enter the unit or the battery compartment and cause
serious problems. Proper care should be taken to mitigate the
introduction of moisture into the machine and make sure that no
moisture is present during storage. Moisture can quickly lead to
corrosion, electrical shorts, and even rust—all of which can render the
unit damaged and out of warranty. This type of damage is preventable!
If you are operating in rainy, wet conditions, it is recommended that
you place the unit inside of a large plastic storage bag or use a
water/weatherproof deployment bag to keep water from getting to it.
When storing the unit for prolonged periods, be sure that you keep it in
a dry location. Remove batteries prior to storage or extended periods of
inactivity! All batteries, whether alkaline or rechargeable, should be
removed from the game calls, decoys, and transmitters prior to storage
or periods of inactivity. Batteries left inside of electronic devices can
leak over time. Damages caused by this can be severe and potentially
destroy the electrical components.
8. FCC & IC Information
RF Exposure Safety Notice
The SnowPro transmitter is not intended to be operated closer than
20cm (about 8 inches) to your body. The transmitter can produce a
radiated RF field like that of a standard cell telephone, although the
duty cycle of this RF field is much lower than that of a cell telephone.
Using the transmitter closer than 8 inches to your body can increase
your exposure to RF energy levels thought by some to be harmful.
Additionally, operation near your body can detune the antenna causing
a decrease in operating performance.
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
18