Foxpro Inferno Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Equipamento de caça Foxpro Inferno. Foxpro Inferno 12 páginas.

Quick Start Guide

This is a brief operational overview to help you get started. We strongly recommend that you read the

manual in its entirety to fully understand all of the capabilities of the product.

THE INFERNO TRANSMITTER IS NOT INTENDED TO OPERATE THE CALLER AT DISTANCES SHORTER THAN

1 METER (3 FEET). IF THE TRANSMITTER IS LOCATED TOO CLOSE TO THE CALLER, PROPER OPERATION

CANNOT BE ENSURED.

Turn on the Inferno by moving the power switch to the on position (to the right). When powered

on, the Inferno pilot lamp illuminates green, indicating that it is powered on.

Turn on the Inferno speaker by moving the speaker switch to the right.

Turn on the Inferno transmitter by pushing and holding the power button for approximately 1-2

seconds.

Notice the black horizontal highlight bar on the display. The bar moves up and down the screen

as you use the scroll up or down arrow buttons. Using the scroll buttons on the transmitter,

navigate the highlight bar to the category you wish to pick a sound from, and then push the

"Select" button. The sounds assigned to that category will now be displayed.

Use the scroll buttons to highlight a sound that you wish to play.

Push the "Select" button a single time to begin playback.

Use the volume up button to raise the volume level to your desired setting. The transmitter has

20 volume steps.

To mute the sound: Push the "Mute" button a single time. When muted, the mute status indicator on the

transmitter display shows an "M". Un-muting is accomplished by pushing the "Mute" button a second time

and the "M" will no longer be displayed. To switch sounds: Use the scroll buttons to navigate to a different

sound selection and then push the "Select" button. You can switch sounds while the Inferno is actively

playing a sound or while muted.

The Inferno transmitter is capable of storing up to 10 unique presets/favorites. A preset or favorite is a

shortcut to a specific sound and volume level. The Inferno transmitter has 2 quick-access preset buttons

located on the keypad labeled "P1" and "P2." By default, the transmitter has no presets established. The

following instructions describe how to establish a preset:

From the main screen on the transmitter, select the "Favorites/Presets" menu item.

Select one of the 10 preset slots. Notice that the screen indicates "Preset Recording" on the top

line of the display. The second line down displays "P1 – Select Sound."

Use the scroll buttons to highlight the sound you want to select for this preset and then push the

"Select" button.

Use the volume buttons to set the desired volume level for this preset and then push "Select."

Your preset is now setup.

To initiate playback of presets 1-2: Make sure that both the Inferno and Inferno transmitter are both

turned on, and then push the corresponding preset button (P1 or P2) on the transmitter keypad. The

Inferno will then instantly switch to that sound and volume level. To initiate playback of any other preset:

Select the "Favorites/Presets" menu on the main screen, browse through the available presets, and then

use the "Select" button, just as if you were picking a sound for normal playback. The user button can be

configured to initiate playback of presets 3, 4, and 5.

IMPORTANT NOTE