Foxpro WILDFIRE Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Desporto & Ar livre Foxpro WILDFIRE. Foxpro WILDFIRE 20 páginas. Digital game caller

NOTE: The first time you press the "SEND" button, your sound

will be muted by the WILDFIRE. You will need to increase your

volume in order to hear it.

3. Raise your volume level by pressing and holding the volume up button.

As you raise the volume level, the on screen volume level indicator will

increment. You can decrease the volume by pressing and holding the

volume down button.

3.4 Mute

The mute function on the TX9 silences the sound you are playing and pauses

the sound in that position. Upon un-muting the sound, it will begin playing from

where it left off.

The recall button remembers the last sound and volume level that you were

operating with. For example, if you are playing sound 001 at volume 9, and

then switch to sound 002 at volume 5, by pressing the recall button you will

jump back to sound 001 and volume 9.

The TX9 provides you with 10 volume steps controlled by the volume up and

volume down arrow buttons. The volume level is displayed on the remote

control screen.

The elapsed timer allows you to see how long you have been on a stand. The

timer starts as soon as you turn on the TX9 transmitter. You can reset the timer

by pressing the Auxiliary and Sound Up buttons simultaneously. The timer will

automatically reset to 00:00 if it is allowed to continue beyond the 99:59 mark.

The TX9 allows you to have two presets. Each preset provides one button

access to your most frequently used sounds. The stored sound number of

presets is shown on the top right of the status line on the TX9 transmitter. The

associated volume is not shown (see the image on page 10). To program a

preset, perform the following:

1. Press and hold P1 for 5 seconds. The top line of the TX9 display will

change to: "SEL SND/VOL PRESS P1"

2. Use the sound up/down arrow buttons to highlight the sound you wish

to have set on P1.

3. Use the volume up/down arrow buttons to set the volume level.

Page | 9