Daken DK180 Manual do operador e lista de peças - Página 3

Procurar online ou descarregar pdf Manual do operador e lista de peças para Cortador de relva Daken DK180. Daken DK180 9 páginas. Finishing mower

This information is important in the proper use of your machine. Failure to follow this instruction could result in

damage to your machine or property.

THINK Safety! WORK Safely! Please read the following safety information carefully and follow the advice given to

avoid any potential dangers to yourself and others or damage to the machine. Special safety features are

incorporated in the design of the Finishing Mower for your protection. However, it can still be highly dangerous

to the careless operator.

YOU are responsible for the SAFE operation and maintenance of your Finishing Mower. YOU must ensure that

you and anyone else, who is going to operate, maintain or work around the Finishing Mower be familiar with the

operating, maintenance and safety procedures contained in this manual.

DON'T let familiarity trap you into danger.

DON'T allow riders on the Finishing Mower.

SPECTATORS (particularly children) must be kept well away while operating as sticks and stones can fly further

than you think.

NEVER start or operate your Finishing Mower unless sitting on tractor seat.

ALWAYS place all controls in neutral, lower machine, stop PTO and turn off engine before dismounting tractor.

ALWAYS keep hands, feet, hair and clothing away from moving parts.

DON'T attempt any adjustment whatsoever while the machine is operating or spinning.

DON'T attempt to clear any obstruction around the machine while the machine is operating or spinning to a

stop.

DON'T attempt to clear any obstruction from underneath the machine while the machine is operating or spinning

to a stop.

DON'T operate your Finishing Mower whilst it is in the raised position.

ALWAYS know what you are cutting. Never operate in an area that has hidden obstacles. Remove all sticks,

stones, wire or other objects that might be hooked or snagged, causing injury or damage from the working area

before starting.

MAKE REGULAR INSPECTION of cutter assembly for fracture and be sure that all blades and guards are properly

attached. Replace if any irregularity or excessive wear shows.

NEVER exceed the limits of your Finishing Mower. If it's ability to do a job, or to do so safely is in question –

DON'T TRY IT