DSC ELECTRONICS DP-M Series Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Fonte de alimentação DSC ELECTRONICS DP-M Series. DSC ELECTRONICS DP-M Series 16 páginas. High power laboratorypowersupplies

Imprimir página

DP-M Series User's Manual

Version 12.11.2021

1. Connection

Our devices are pre-configured to the power grid chosen with order (if not specified otherwise, our devices are

manufactured for the EU power grid 230V 50Hz / 400V 50Hz). Subsequent adjustment after delivery is not possible.

Connecting the device to an unsuitable power source will void any warranty.

Note: Devices of the DP-M series in the performance class 4.000W - 9.000W can cause a high starting current when

switched on. Therefore, the use of circuit breakers of classes C, D or K is recommended.

Voltage (Recommended)

Voltage (Max.)

Frequency

Circuit breaker minimum requirements

Voltage (Recommended)

Voltage (Max.)

Frequency

Circuit breaker minimum requirements

Voltage (Recommended)

Voltage (Max.)

Frequency

Circuit breaker Minimum requirements

1 Phase / EU Power Grid

1 Phase / American Power Grid

3 Phase / EU Power Grid (TN-S Network)

DSC-Electronics Germany • Georgstraße 36 • 53111 Bonn

230V ± 10% AC

250V AC

50Hz - 60Hz

The maximum current of the device shall be determined as

follows:

I = (maximum power of the device / 230) + 2

115V ± 10% AC

130V AC

50Hz - 60Hz

The maximum current of the device shall be determined as

follows:

I = (maximum power of the device / 115) + 4

380V - 410V

430V

50Hz

The maximum phase current of the device shall be

determined as follows:

I = ((maximum power of the device / 400) / 1,73) + 2