3MillID Inline Reader Manual - Página 4

Procurar online ou descarregar pdf Manual para Leitor de cartões 3MillID Inline Reader. 3MillID Inline Reader 4 páginas. Access control reader

installation guide

Remove module securement screw. Lever bottom edge of reader module

away from the backplate, and lift up.

Fix reader BACKPLATE to a plain surface finish, using suitable screw

fixings having a diameter no greater than 0.15 in. (4mm).

Mounting this reader on (or near) metal may impair the read

range of the unit.

Once the backplate is secured, make wire

connections to the reader, in accordance with

the screw terminal connections shown on

Page 3 of this document and your control panel

requirements. Ensure the cable does not impair or

prevent the reader module being secured.

Fasten the reader module, ensuring the top-edge fixing lugs engage

correctly with the recesses at the top of the backplate. Swing the bottom

edge of the module down and forward until you feel the unit 'snap' shut.

Secure the module to the backplate using the M3x10mm screw supplied.

If required, you may opt to use a security screw to the sizes shown here.

100-02635-A

Following installation, it is recommended the access

control system and control units are subjected to a

maintenance and operational test procedure.

TEST COMPLETE SYSTEM AT LEAST ONCE A YEAR

Backplate FIXING TEMPLATE.

If printed full scale, you may use the drawing below as a

fixing template.

MEASURE and CHECK DIMENSIONS before use.

1.4 in.

(34.4mm)

3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129

www.3millid.com

+1 303 475 4972

Inline

MANUAL