DSP VHF/UHF FM transceiver Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Transcetor DSP VHF/UHF FM transceiver. DSP VHF/UHF FM transceiver 6 páginas.

First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.

Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip

UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r

Programming Manually... This is not covered in the owners manual, here's how.

To program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel #010

Turn on radio.

If in Memory Mode switch to VFO Mode (VFO/MR)

Select 5 KHz Step - (MENU + 1 + MENU) (Use the

Enter

Press [MENU] + 2 + [MENU]

Press [MENU] + [EXIT]

Press [MENU] + 5 + [MENU]

Press [MENU] + [EXIT]

Press [MENU] + 1 + 3 + [MENU]

Press [MENU] + [EXIT]

Press [MENU] + 2 + 7 + [MENU]

Press [MENU] + [EXIT]

Enter

Press [MENU] + 2 + 7 +

[MENU] + [MENU] + [EXIT]

UV-5R.com

146.985

Use the

Radio prompts that REC FREQ has been stored

146.385

Radio prompts that TX FREQ has been stored

Return to Memory Mode (VFO/MR)

key for 5K) (MENU + EXIT)

The receive frequency

key to select Low Power

To accept and exit

key to select Wide Bandwidth

To accept and exit

Use the

key to select 100 Hz Tone

To accept and exit

Enter 010 or Use the

This stores the Receive Frequency

The transmit frequency

key to select 010