Attero Tech unD6IO Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de gravação Attero Tech unD6IO. Attero Tech unD6IO 18 páginas. 4x2 multi-io dante wall plate interface
Imprimir página3.2 – Device Specifications
Audio Inputs
Two Balanced and RF filtered
inputs on XLR (Inputs 1/2)
Stereo Unbalanced Inputs on
Input Types:
RCA (Inputs 3/4 A)
Stereo Unbalanced Inputs on
3.5mm TRS (Inputs 3/4 B)
-18dB,
Gain:
+40dB, software selectable
(Inputs 1/2)
>1.8K Ohms at any gain
(Inputs 1/2)
Input
Impedance:
>10k Ohms (Inputs 3/4 A & B)
+20dBu @ -18dB gain,
+6dBu @ - 3 dB gain,
-23dBu @ +25dB gain
Maximum
-38dBu @ +40dB gain
Input Levels:
(Inputs 1/2)
+12 dBu ( Inputs 3/4 A & B)
+48V, software selectable
Phantom
Power:
(Inputs 1/2 only)
Audio Input Performance
EIN:
-115 dBu (Mic Inputs 1/2)
< 0.02% @ 1kHz for all gain
settings, input signal 3dB
below maximum.
THD+N:
(Mic Inputs 1/2)
<0.01% (Line Inputs 3/4)
20Hz – 20kHz, +/- 1dB
(-18 and – 3 dB gain on Inputs
½)
50Hz – 20kHz +/- 1dB
Frequency
Response:
(+25dB and +40dB gain on
Inputs ½)
20Hz – 20kHz, +/- 1dB
(Inputs ¾ A & B)
Attero Tech LLC 2017
-3dB,
+25dB
and
Output Type:
Attenuation
Range:
Output
Impedance:
Maximum
Output Levels:
Audio Output Performance
Dynamic
Range:
THD+N:
Frequency
Response
Page 1
unD6IO
User Manual
Audio Outputs
Two balanced line level with
automatic muting on loss of
Dante
signal
on
Depluggable Phoenix
(Outputs ½ B)
Two
unbalanced
line
outputs on stereo 3.5mm TRS
(Outputs ½ A)
Software controlled volume
(0 to -60dB, 1dB increments)
200 Ohms balanced,
100 Ohms unbalanced
+12 dBu at 0dB attenuation
(Output 1/2 A)
+20dBu at 0dB attenuation
(Output 1/2 B)
>97 dB
<0.01% @ 1kHz, input signal 3dB
below maximum
20Hz – 20kHz, +/- 1dB
(-18dB and - 3dB gain)
50Hz - 20kHz +/- 1dB
(+25 and +40 dB gain)
614-00029 Rev 02_b
6-pin
level