AddBike Carry'Box Module Manual do utilizador e de instalação - Página 6
Procurar online ou descarregar pdf Manual do utilizador e de instalação para Acessórios para bicicletas AddBike Carry'Box Module. AddBike Carry'Box Module 16 páginas. Applicable to the addbike and addbike+
Também para AddBike Carry'Box Module: Manual do utilizador e de instalação (18 páginas), Manual de instruções (18 páginas)
Imprimir página
3. Content of the Carry'Box parcel
The Carry'Box is delivered in a parcel containing:
A compact slat ;
•
The textile part of the module (white bin);
•
The textile lid of the module (yellow);
•
2 upper tubes ;
•
2 front tubes ;
•
1 transverse tube ;
•
2 screws BHC M5x30 ;
•
4 screws BHC M5x30 with the 4 corresponding nuts;
•
This manual for the Carry'Box V4.1. module
•
Before assembling the Carry'Box module on your bike, please verify the following:
Check that the product is in good general condition (no scratches or twisted pieces).
•
4. Installing the Carry'Box
The Carry'Box module must be installed and uninstalled as explained. Improper
installation can lead to accidents that could cause serious injury.
We advise you to add the Carry'Box module to your AddBike only when the
latter is properly installed on your bike so as to make it easier to assembly
For the installation you will need an Allen wrench size 3, and an open-end wrench 8 (Cf. Figure 2).
Open-end wrench (size 8)
6
Figure 2 – Tools needed
Allen wrench (size 3)
VERSION V4.1