DT Research DT3 5 Series Manual de operação básica - Página 4
Procurar online ou descarregar pdf Manual de operação básica para Tablet DT Research DT3 5 Series. DT Research DT3 5 Series 4 páginas. Mobile tablet
Também para DT Research DT3 5 Series: Manual de operação básica (4 páginas)
Imprimir página
DT395
Button Management
Where supported by software, many of the hard buttons on the DT395 are
programmable to perform a function of the user's choice. The exception is the Power
Button and the SAS Button. To activate the button re-assignment application, invoke the
Button Manager application
.
Brightness Control
Where supported by device firmware and software, a hard button may be engaged to
manipulate the display brightness. Press the Windows Mobility Center menu button
(Button 7) on the front of the DT395. Users can increase or decrease the brightness level
of the LCD panel by moving the slider to adjust the brightness of your display.
Battery and Power Management
The DT395 is equipped with an internal Li-Ion battery pack and an optional external
battery pack that clips (hot-pluggable) onto the back of the tablet. The period between
battery recharges can be significantly lengthened by putting the tablet into Standby
mode through the Power Button (see Buttons Function Table) whenever the tablet is not
in use. Depending on the operating software, the DT395 may also be configured to enter
various power-saving modes via the Power Button or through timed entry.
Full Slot Smart Card Reader and SD Card Reader
The DT395 comes with a full slot smart card reader.
•
Remove the rubber cover and insert a card (Picture 1).
•
Pull to remove the card (Picture 2).
(Picture 1)
•
Remove the rubber cover and insert a SD card (Picture 3).
•
Push, release and remove the card (Picture 4).
(Picture 3)
6
ENGLISH
(Picture 2)
(Picture 4)
USING THE DT395
Peripherals Support
Through its USB port, the DT395 supports a wide range of USB-based peripherals. These
peripherals are applicable for software installation, applications storage, data storage,
docking or software recovery and update.
The DT395 is complemented by an optional Desktop Cradle or Wall/ Vehicle Mount
Cradle for support, pass-through charging, and connection to a range of USB peripherals,
including keyboard and mouse. The Cradles offer the following interfaces: a DC-in port
for the AC-DC adapter, an Ethernet port, a VGA output and USB ports. Always seat the
DT395 securely onto the cradle. The cradle must be powered by the AC-DC adapter
for the Ethernet and USB ports to function. The battery packs on the DT395 may be
recharged by connecting the AC-DC adapter directly to the DC-in port on the DT395 or
through the DC-in port on the Cradle while the DT395 is docked.
Remote Management
Depending on software configuration, the DT395 can be centrally managed for asset
monitoring and for software control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.
If the DT395 comes with a 3G module, please contact your product and/or service
provider for the SIM Card installation procedures.
7
ENGLISH