DT Research DT365 Manual de operação básica - Página 5

Procurar online ou descarregar pdf Manual de operação básica para Tablet DT Research DT365. DT Research DT365 9 páginas. Mobile tablet
Também para DT Research DT365: Manual de operação básica (4 páginas)

Imprimir página
DT Research DT365 Manual de operação básica
DT365
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a
launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT365 may be configured using the utilities and methods dictated by the software operating system. The
DT365 should be configurable for various properties such as user profiles, network features, and several system
elements.
Calibration
The touch display for the DT365 is calibrated before shipping. In the event that the calibration has been modified
or is unsatisfactory, the respective calibration routines (e.g., PenMount (PM)) to calibrate the touch interface may
be used.

Wireless Networking

Wireless LAN
The DT365 is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n
WLAN adapter equipped with a hidden custom antenna.
Through the support of typical WLAN adapters, the DT365 should be able to detect all 802.11 access points in
the vicinity for you to select the access point of your choice for connection.
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT365 and the access points have to match.
The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced
alternatives) for secure access.
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking
equipment literature to properly configure associated settings such as Authentication mode, etc.
Refer to the access point operating manuals for setting up the 802.11 access points.
ENGLISH
5