DT Research DT381RP Manual de operação básica - Página 5

Procurar online ou descarregar pdf Manual de operação básica para Tablet DT Research DT381RP. DT Research DT381RP 5 páginas. Rugged tablet

Imprimir página

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the

following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in

conjunction with any other antenna or transmitter.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research

website.

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

signage dtri com

WM281 Wall Mount Cradle Installa�on Guide

1. Use the key to unlock, and slide the latch on the bottom of the Cradle to loosen the Top Clasp.

2. Insert the bottom part of the Tablet into the cradle first with the connector parts correctly

lined up.

3. When the bottom of the Tablet is in place, push

the Tablet against the back and into the Cradle.

4. Push down on the Top Clasp, so the top portion

of the cradle slides down and locks into the

locked-down position.

5. Lock the Cradle with the key.

OPERATION

Moun�ng the Cradle

The Tablet Mount Cradle supports VESA standard mounting options (75 mm x 75 mm or

100 mm x 100 mm) so it can be easily attached onto a wall, in a vehicle, and on a VESA arm.

NOTE: If using a 100 x 100 VESA stand or arm, the VESA Conversion Bracket is

needed. Please place the VESA Conversion Bracket on the back side of the Cradle,

and apply the four M4 screws.

BOG080723 DT381RP ENG