DT Research DT391GS Manual de operação básica - Página 3
Procurar online ou descarregar pdf Manual de operação básica para Tablet DT Research DT391GS. DT Research DT391GS 4 páginas. Mobile tablet
Imprimir página
DT391UF/ DT391GS
OPERATION
Powering ON and OFF
To activate the Tablet basic, push and quickly release the Power Button. The display
will come on in a few seconds. To put the DT391UF/ DT391GS in Standby mode, push
and quickly release the Power Button. To turn the DT391UF/ DT391GS off for extended
storage, power off safely using any software function that " shuts down computer "
provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power — please use the
AC-DC adapter with the DT391UF/ DT391GS when setting up for the first time to
fully charge the internal battery pack. You may charge the external battery pack
by attaching to the DT391UF/ DT391GS while it is plugged in, or with the optional
external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT391UF/
DT391GS a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in " Standby " mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button ( " hold 4+ seconds " feature) to turn off the
tablet — this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
ENGLISH
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed after a launch sequence of several seconds. The wireless LAN connection
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT391UF/ DT391GS may be configured using the utilities and methods dictated
by the software operating system. The DT391UF/ DT391GS should be configurable for
various properties such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT391UF/ DT391GS is often delivered with an embedded (user-inaccessible)
802.11a/b/g/n WLAN adapter equipped with a hidden custom antenna.
• hrough the support of typical WLAN adapters, the DT391UF/ DT391GS should be
T
able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connection.
• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT391UF/ DT391GS
T
and the access points have to match. The SSID is case-sensitive and it is recom-
mended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for
secure access.
•
W
hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
settings such as Authentication mode, etc.
• efer to the access point operating manuals for setting up the 802.11 access points.
R
5
ENGLISH