DT Research DT395BT Manual de operação básica - Página 4

Procurar online ou descarregar pdf Manual de operação básica para Tablet DT Research DT395BT. DT Research DT395BT 4 páginas. Mobile pos tablet

Imprimir página
DT395BT
Power/Battery LED Status:
•
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking orange indicates that the battery is below 10%
•
Blinking blue and orange alternately indicates the battery is being warmed up. Do not
unplug the AC/DC adapter.
Precautions
•
Always exercise care when operating and handling the DT395BT.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT395BT should face away from direct light to reduce glare.
•
If the AC-DC power adapter is used to recharge or power the
AC-DC adapter other than the one provided with the tablet or acquired from the
manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the DT395BT and disconnect all power sources. Report the
problem to your device provider immediately.
•
Never attempt to disassemble the DT395BT, as this will void the warranty.
Basic Features
The DT395BT wireless tablet integrates a bright and responsive touch display, 1 USB port,
and embedded networking elements such as wireless LAN or optional 3G. The DT395BT
is complemented by a suite of accessories, including battery expansion, docking cradles,
and wall/ vehicle mount cradles, for a comprehensive user experience.
A DT395BT typically integrates an 802.11ac wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT395BT does not come with
such a network adapter, please consult your device provider to establish the desired
network connectivity.
6
ENGLISH
tablet, do NOT use any
USING THE DT395BT
Peripherals Support
Through its USB port, the DT395BT supports a wide range of USB-based peripherals.
These peripherals are applicable for software installation, applications storage, data
storage, docking or software recovery and update.
The DT395BT is complemented by an optional Desktop Cradle or Wall/ Vehicle Mount
Cradle for support, pass-through charging, and connection to a range of USB peripherals,
including keyboard and mouse. The Cradles offer the following interfaces: a DC-in port
for the AC-DC adapter, an Ethernet port and USB ports. Always seat the DT395BT securely
onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet and
USB ports to function. The battery packs on the DT395BT may be recharged by connecting
the AC-DC adapter directly to the DC-in port on the DT395BT or through the DC-in port on
the Cradle while the DT395BT is docked.
Remote Management
Depending on software configuration, the DT395BT can be centrally managed for asset
monitoring and for software control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.
If the DT395BT comes with a 3G module, please contact your product and/or service
provider for the SIM Card installation procedures.
To Hold the Tablet
Left hand: grip the left back side of the tablet
with your left hand four index fingers, with thumb
resting on the top of the back side of the tablet and
palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with thumb
resting on the top of the back side of the tablet and
palm securely against the back.
7
ENGLISH