DT SWISS Ratchet LN Manual técnico - Página 18

Procurar online ou descarregar pdf Manual técnico para Acessórios para bicicletas DT SWISS Ratchet LN. DT SWISS Ratchet LN 19 páginas.
Também para DT SWISS Ratchet LN: Manual técnico (16 páginas)

Imprimir página

3. TROUBLE SHOOTING

Issue

Freewheel is blocked

Freewheel does not engage /

slips

Hub has axial play

Hub rotates stiffly

Hub makes noise

Notches from the cassette on

the freewheel body.

Freewheel body rotates with

difficulty.

Freewheel is too noisy / too

quiet.

Reason

Spacer was forgotten during

assembly.

Spacer was compressed by

overtightening the thru axle.

One or both ratchets are mounted

upside down.

Too much or wrong grease on the

ratchets.

Ratchets are worn.

One or both springs were

forgotten during assembly.

Ball bearings were not mounted

correctly.

Ball bearings are worn out.

Ball bearing non-drive side driven

in too tight.

Mounting sequence of the ball

bearings not observed.

Ball bearings are worn out.

The steel cassette works itself

into the alloy web of the freewheel

body.

Ball bearings in the freewheel

body are worn out.

The perception of the freewheel sound is very subjective. While some

riders prefer a loud freewheel sound, other riders want a quiet freewheel.

In principle, the freewheeling sound can be influenced by the amount of

grease between the ratchets. Less grease increases the freewheeling

sound, but at the same time leads to higher wear.

Solution