ATTO Technology FastStream SC 5300 Manual de instalação

Procurar online ou descarregar pdf Manual de instalação para Armazenamento ATTO Technology FastStream SC 5300. ATTO Technology FastStream SC 5300 6 páginas. Storage controllers for audio
Também para ATTO Technology FastStream SC 5300: Especificações técnicas (2 páginas), Brochura (14 páginas), Folha quente (2 páginas), Manual de seleção (1 páginas), Manual de seleção (1 páginas), Matriz de interoperabilidade (1 páginas), Referência de desempenho (2 páginas), Características e vantagens (2 páginas), Especificações (2 páginas)

Imprimir página
ATTO Technology FastStream SC 5300 Manual de instalação
Verify the contents of your packing box
• ATTO FastStream SC 5300. Note the serial
number of your FastStream SC 5300 for later
use: ____________________________
• Power cord
• Ethernet cable
• RS-232 serial cable
• "L" brackets
• Setup CD including Express Power Center,
ExpressStripe, QuickNAV, Benchmark tool,
Celerity driver, installation guides and
Installation and Operation Manual
Install the Celerity storage adapter
1
Power off your computer and install the ATTO
Celerity storage adapter in the bottom PCI-X or
PCIe slot of your HP XW Workstation.
2
Power up your system.
3
Install the Celerity driver by clicking the
setup.exe file located in the Celerity folder on
the included setup CD. Follow the instructions
and continue to the next step.
N ote
®
Windows
users: click OK for each warning
message box presented.
© 2007 ATTO Technology Inc. PRMA 000-0365-000
Parity protection kit for MediaDock

Installation Guide

Install the FastStream SC 5300
1
Place the FastStream SC 5300 on a stable flat
surface or install it into a standard 19" rack by
attaching the supplied "L" brackets
2
Connect the Ethernet port to your network
using a Cat 5e Ethernet cable or better.
3
Connect your SCSI cables to the MediaDock™
II chassis in single bus mode or split bus mode.
See Exhibit 1 and Exhibit 2.
Exhibit 1 FastStream SC 5300 in single bus attached to
MediaDock II units
Exhibit 2 FastStream SC 5300 in split bus attached to
a MediaDock II
4
Connect the LC-LC Fibre Channel cables from
the FastStream SC 5300 to the Celerity storage
adapter.
5
Connect the AC power cord from the
FastStream SC 5300 to the proper AC source
outlet.
6
Turn on power to the FastStream SC 5300
using the switch on the back of the appliance.
..............................................................................
1