DT SWISS RATCHET EXP OS Manual técnico - Página 10

Procurar online ou descarregar pdf Manual técnico para Interruptor DT SWISS RATCHET EXP OS. DT SWISS RATCHET EXP OS 20 páginas.

2.8 DISMOUNTING THE BEARING FROM THE THREADED RATCHET

1. Put the threaded ratchet with the bearing

into the mounting / dismounting tool.

→ The toothing of the threaded ratchet

must face upwards.

→ Put the ratchet on the side of the tool

with the fitting diameter. The ratchet

may only move minimally in the tool.

2. Slide the axle with its long end through the

ball bearing.

3. Use a plastic hammer to knock the ball

bearing out of the ratchet with light hammer

strokes.

4. Remove the ratchet and the bearing from

the tool.

HXTXXX00N6106S