DT SWISS RATCHET EXP OS Manual técnico - Página 18

Procurar online ou descarregar pdf Manual técnico para Interruptor DT SWISS RATCHET EXP OS. DT SWISS RATCHET EXP OS 20 páginas.

2.15 PUTTING ON THE FREEWHEEL BODY AND THE END CAPS

1. Put the freewheel body onto the hub.

2. Check if the freewheel body can be turned

and if the ratchets are engaging.

3. Grease both bearings and the inner side of

both end caps.

4. Put on the left and the right end cap.

→ The shorter end cap must be placed on

the drive side.

1. Turn the freewheel body in both directions.

→ The freewheel body can be turned

counterclockwise easily.

The ratchets engage audibly and

perceptibly.

→ The freewheel body cannot be turned

clockwise.

2. Check the tightness of the end caps.

→ The end caps are firmly seated on the

axle and are fully pushed on.