DTC PB-5 Manual do operador - Página 14

Procurar online ou descarregar pdf Manual do operador para Transmissor DTC PB-5. DTC PB-5 16 páginas. Beacon transmitter

Imprimir página
PROGRAMMING
Serial Port of
computer: COM1
or COM2
Antenna
POWER
14
DTC COMMUNICATIONS, INC.
1
Connect the antenna to the PB-5.
2
Install the programming cable into the RS232
connector on the PB-5.
3
Plug the serial cable of the programming cable
into the COM1 or COM2 port of your computer.
4
Select Start, programs, DTC communications on
your computer.
5
The system allows you to select device COM1 or
COM2, depending on which serial port you are
connected to.
The cycle power screen displays.
6
Connect the battery pack to the PB-5 and click
OK.
A message screen displays PB-5 downloading.
7
Click on the TX Tab of the screen.
8
Click on the channel you need to change and click
on the Edit Channel button.
9
Enter the new settings in the "Enter new
Frequency screen. You can also make
changes to the width, motion detect, and
the mode.
10 Click on the OK button.